Setting up a microphone on Windows 7

Setting up a microphone on Windows 7

Post just about everything that isn't directly related to Spring here!

Moderator: Moderators

Post Reply
User avatar
Sausage
Posts: 272
Joined: 05 Jan 2010, 23:47

Setting up a microphone on Windows 7

Post by Sausage »

Hello, my name is sausage and I have a problem.

I recently got a new PC which has windows 7 x64. It works great and runs spring like a boss but it doesn't seems to be able to work with microphones at all! Having a working microphone is very important to me so I would be grateful if you could help me out.

So far I have tried my turtle beach headset, creative fatality headset and some crappy VIA headset, in both the front and back jacks. Yes, I did make sure they were turned on and yes I did put them in the right jack (the pink one). The only sound options I seem to have are 'sound' and 'speech recognition' in control panel. In 'speech recognition' there is a button called 'set up microphone' and when I click it I get:

Image

but I think speech recognition is just something where you use speech to control your computer and obviously it requires a working microphone.

I have tried clicking many things in the 'sound' panel. I definitely made sure the microphone was enabled and I have also confirmed that my drivers are up to date and I also know that all my microphones work properly. When I click 'properties' on the 'VIA High Definition Audio' thing (which is in the 'front mic properties') it says "This device is working properly."

Teamspeak either says "failed to open capture device" or for my fatality ones it said something like "invalid capture device was detected" but they definitely work. When I click 'test voice' in Teamspeak it just says "Error failed to open selected capture device".
Last edited by Sausage on 15 Apr 2010, 19:43, edited 2 times in total.
User avatar
KaiserJ
Community Representative
Posts: 3113
Joined: 08 Sep 2008, 22:59

Re: Setting up a microphone on Windows 7

Post by KaiserJ »

something that may be of note: windows doesn't like audio out & USB out for sound at the same time; if you have something plugged into the audio jack, and something plugged into the USB port for sound, it seems to always pick the USB port for output.

also if you try to go between the two (say... halfway thru a game) then you're out of luck, you have to restart the game
User avatar
Sausage
Posts: 272
Joined: 05 Jan 2010, 23:47

Re: Setting up a microphone on Windows 7

Post by Sausage »

My turtle beaches have a USB cable for power but the other 2 don't. I tried unplugging all my USBs and all jacks except my microphone on the basic VIA headset but still didn't work.
User avatar
Jazcash
Posts: 5309
Joined: 08 Dec 2007, 17:39

Re: Setting up a microphone on Windows 7

Post by Jazcash »

You should see if they work on another Windows 7 PC or if they work on a different OS altogether. If they do, then it's obviously a Windows 7 fault or compatibility issue.
User avatar
KaiserJ
Community Representative
Posts: 3113
Joined: 08 Sep 2008, 22:59

Re: Setting up a microphone on Windows 7

Post by KaiserJ »

suggestion : try googling the exact model # of the headphones you're using, perhaps theres a special driver or something that you need (unlikely, but still)
User avatar
Jazcash
Posts: 5309
Joined: 08 Dec 2007, 17:39

Re: Setting up a microphone on Windows 7

Post by Jazcash »

KaiserJ wrote:suggestion : try googling the exact model # of the headphones you're using, perhaps theres a special driver or something that you need (unlikely, but still)
Well he said it doesn't work with 3 different headsets that he tried so I doubt it's that.

But I would agree that Googling is a good route to travel :P
User avatar
Sausage
Posts: 272
Joined: 05 Jan 2010, 23:47

Re: Setting up a microphone on Windows 7

Post by Sausage »

They work on my Windows XP PC which I had before this one, on my Xbox and on my brothers Windows XP PC. I don't have another Windows 7 PC to test them on.

All 3 of my headsets pretty much have the same problem and they all work fine for sound but not for microphone. So I doubt it would be a special driver for the headset.

I tried Google but he failed me. I'm not entirely sure what I should Google anyway, just 'microphone problem windows 7' rephrased a bunch of times is a bit too general and none of the results were helpful.
Last edited by Sausage on 15 Apr 2010, 20:05, edited 1 time in total.
User avatar
KaiserJ
Community Representative
Posts: 3113
Joined: 08 Sep 2008, 22:59

Re: Setting up a microphone on Windows 7

Post by KaiserJ »

i have at least 2 usb devices (webcam) that don't work on any windows beyond xp...

i hope for your sake its not a problem like this
User avatar
Sausage
Posts: 272
Joined: 05 Jan 2010, 23:47

Re: Setting up a microphone on Windows 7

Post by Sausage »

Image

Image

I noticed it says output device but no input device, is this the problem? (I haz very limited PC knowledges)
User avatar
KaiserJ
Community Representative
Posts: 3113
Joined: 08 Sep 2008, 22:59

Re: Setting up a microphone on Windows 7

Post by KaiserJ »

o.O is that what comes up when you doubleclick the little speaker in your taskbar? seems strange, because it's the directX setup
User avatar
Sausage
Posts: 272
Joined: 05 Jan 2010, 23:47

Re: Setting up a microphone on Windows 7

Post by Sausage »

no I typed dxdiag in run hoping to find out what my sound card was lol
User avatar
Jazcash
Posts: 5309
Joined: 08 Dec 2007, 17:39

Re: Setting up a microphone on Windows 7

Post by Jazcash »

It doesn't seem to me like it's anything serious.

Have you tried turning it off and on again?
Have you tried turning the mic switch to "on"?
Have you tried plugging it in in both front and back jacks?
Have you tried fiddling with all the sound options such as turning all the sliders you see to max?
Have you tried making sure the mic's are pushed all the way in and that it's not a loose connection?
Have you tried making sure the mic part of the headset is pushed in nicely?
Have you tried it in safe mode?
Have you tried formatting you PC?
Have you tried Googling some more?
Have you tried running through the mic setup test with all the mics?
Have you tried making the loudest noise you can into the mics to see if it registers any kind of pickup at all?
Have you tried downloading some third party software for mics?

Tbh, if it doesn't work with all 3 of the mics you tried on your PC but has worked on other PC's/hardware then it's probably a fault with your particular machine/software. I'm using the Creative Fatality mic on Windows 7 x64 and it's working fine, mic an' all.
User avatar
Caydr
Omnidouche
Posts: 7179
Joined: 16 Oct 2004, 19:40

Re: Setting up a microphone on Windows 7

Post by Caydr »

Right click on the speaker icon, go through the playback and recording devices. Make sure everthing's kosher. Properties menus, Config menus, default devices, etc. If you've disabled some items already try re-enabling them and setting them to default since sometimes virtual devices are created for legacy software support and that sort of thing. This would be especially common in the case of a USB device, since old games/software will be looking for a PCI sound card, not a USB device.

Also if you've been a smartass and disabled or tweaked any standard Windows processes, be aware that these often have functionality you'd least suspect. For example, all kinds of obscure networking issues can be traced back to people disabling Windows Firewall by disabling the process, rather than just going into the Windows Firewall menu and telling it to deactivate.
Post Reply

Return to “Off Topic Discussion”